To complete your registration, fill out your registration card. Attach stickers. Send the original bearing along with the registration card to us.

IMPORTANT: The package must be postmarked within 30 days of your installation date.

Place the larger Serial Number sticker
in a visible location on your car.

Suggested locations:

  • door (by the VIN sticker) or door jamb
  • engine compartment (near oil change stickers) or engine lid (911®)
  • rear trunk lid (Boxster®)
  • next to the emissions label or near build code options sticker

Keep the smaller Serial Number sticker.

Fill out your IMS Kit
registration card.

The registration card is included with every IMS Retrofit / IMS Solution kit

  • Use the same email address you submitted during online registration
  • Attach the smaller Serial Number Sticker in the designated space of your card

Write down the address at the bottom of the card.

Ship the original bearing and registration card
to the address at the bottom of your card.

Do not clean the original bearing removed from your engine.

  • Do not send the flange. Ship the bearing only.
  • Pack the bearing in a ziploc bag to make sure it does not leak oil or grease.
  • Ship along with your registration card to the address at the bottom of your card.
  • The package must be postmarked within 30 days from the installation date you submitted during your registration.
  • We recommend shipping using a trackable method.

After we receive your original bearing and registration card with original serial number tag attached, we will validate your registration and update its status accordingly.

Allow 6-12 weeks for processing. You can check your registration status online at any time at imscheck.com by searching for your IMS kit serial number (digits only) or VIN of your car.

If you need to change or edit your registration, please contact support@imsretrofit.com.

Finish & Back to Home Page